emi suppression capacitors (mkp) series/type: b81130* the following products presented in this data sheet are being withdrawn. for further information please contact your nearest epcos sales office, which will also support you in selecting a suitable substitute. the addresses of our worldwide sales network are presented at www.epcos.com/sales. ordering code substitute product date of withdrawal deadline last orders last shipments b81130* b3292* 2007-08-10 2008-09-30 2008-12-31
typical applications x2 class for interference suppression "across the line" applications climatic max. operating temperature: 100 c climatic category (iec 60068-1): 40/100/21 construction dielectric: polypropylene (mkp) plastic case (ul 94 v-0) epoxy resin sealing (ul 94 v-0) features small dimensions self-healing properties terminals parallel wire leads, lead-free tinned standard lead lengths: 6 1 mm special lead lengths available on request marking manufacturer's logo, lot number, date code, rated capacitance (coded), cap. tolerance (code letter), rated ac voltage, series number, sub-class (x2), dielectric code (mkp), climatic category, passive flammability category, approvals. delivery mode bulk (untaped) taped (ammo pack or reel) for taping details, refer to chapter "taping and packing". dimensional drawing dimensions in mm lead spacing 0.4 lead diameter d 1 10 mm 0.6 15 ... 27.5 mm 0.8 marking examples = 10 mm 3 15 mm/c r 1 m f = 27.5 mm/c r >1 m f approvals marks of conformity standards certificate en 132400, iec 60384-14 138554 ul 1414 / ul 1283 e97863 / e157153 csa c22.2 no.1 e97863 cqc (gb/t 14472-1998) cqc02001001667 emi suppression capacitors (mkp) b81130 x2 / 275 vac not for new design 2
overview of available types lead spacing 10 mm 15 mm 22.5 mm 27.5 mm c r ( m f) 0.010 0.015 0.022 0.033 0.047 0.056 0.068 0.10 0.15 0.22 0.33 0.47 0.68 1.0 1.5 2.2 b81130 x2 / 275 vac not for new design 3
ordering codes and packing units lead spacing mm c r m f max. dimensions w h l mm ordering code (composition see below) ammo pack pcs./unit reel pcs./unit untaped pcs./unit further e series and intermediate capacitance values on request. composition of ordering code + = capacitance tolerance code: *** = packaging code: m = 20% k = 10% 289 = ammo pack 189 = reel 000 = untaped (lead length 6 1 mm) (closer tolerances on request) 10 0.010 4.0 9.0 13.0 b81130c1103+*** 1000 1700 1000 0.015 4.0 9.0 13.0 b81130c1153+*** 1000 1700 1000 0.022 5.0 11.0 13.0 b81130c1223+*** 830 1300 1000 0.033 5.0 11.0 13.0 b81130c1333m*** 830 1300 1000 0.033 6.0 12.0 13.0 b81130a1333+*** 680 1100 1000 0.047 6.0 12.0 13.0 b81130c1473+*** 680 1100 1000 15 0.022 5.0 10.5 18.0 b81130b1223+*** 1170 1300 1000 0.033 5.0 10.5 18.0 b81130b1333+*** 1170 1300 1000 0.047 5.0 10.5 18.0 b81130b1473+*** 1170 1300 1000 0.056 5.0 10.5 18.0 b81130c1563m*** 1170 1300 1000 0.068 6.0 11.0 18.0 b81130c1683+*** 960 1100 1000 0.10 6.0 12.0 18.0 b81130c1104m*** 960 1100 1000 0.10 7.0 12.5 18.0 b81130a1104+*** 830 900 1000 0.15 8.5 14.5 18.0 b81130c1154+*** 680 700 500 0.22 9.0 17.5 18.0 b81130c1224+*** 640 700 500 22.5 0.15 6.0 15.0 26.5 b81130b1154+*** 680 700 720 0.22 7.0 16.0 26.5 b81130b1224+*** 580 600 630 0.33 8.5 16.5 26.5 b81130c1334+*** 480 500 510 0.47 10.5 16.5 26.5 b81130c1474m*** 390 400 540 0.47 10.5 18.5 26.5 b81130a1474+*** 390 400 540 0.68 11.0 20.5 26.5 b81130c1684+*** 370 350 510 27.5 0.47 11.0 21.0 31.5 b81130b1474+*** 350 320 0.68 11.0 21.0 31.5 b81130b1684+*** 350 320 1.0 12.5 21.5 31.5 b81130c1105m*** 300 280 1.0 13.5 23.0 31.5 b81130a1105+*** 250 260 1.5 15.0 24.5 31.5 b81130c1155m*** 240 1.5 18.0 27.5 31.5 b81130a1155+*** 200 2.2 18.0 27.5 31.5 b81130c1225m*** 200 2.2 19.0 30.0 31.5 b81130a1225+*** 180 b81130 x2 / 275 vac not for new design 4
technical data max. operating temperature t op,max +100 c dissipation factor tan d (in 10 -3 ) at 20 c (upper limit values) c r 0.1 m f c r > 0.1 m f at 1 khz 1.0 1.0 100 khz 5.0 insulation resistance r ins c r 0.33 m f c r > 0.33 m f or time constant t = c r r ins 100 000 m w 30 000 s at 20 c, rel. humidity 65% (minimum as-delivered values) dc test voltage 2121 v, 2 s passive flammability category to iec 40 (co) 752 b maximum continuous ac voltage (v ac ) 310 v (50/60 hz) rated ac voltage (iec 60384-14) 275 v (50/60 hz) maximum continuous dc voltage (v dc ) 760 v operating ac voltage v op at high temperature t a 100 c v op = v ac (continuously) t a 100 c v op = 1.25 v ac (1000 h) damp heat test 21 days / 40 c / 93% relative humidity limit values after damp heat test capacitance change d c/c 5% dissipation factor change d tan d 0.5 10 -3 (at 1 khz) insulation resistance r ins 1.0 10 -3 (at 10 khz) or time constant t = c r r ins 3 50% of minimum as-delivered values b81130 x2 / 275 vac not for new design 5
pulse handling capability "dv/dt" represents the maximum permissible voltage change per unit of time for non-sinusoidal voltages, expressed in v/ m s. "k 0 " represents the maximum permissible pulse characteristic of the waveform applied to the capacitor, expressed in v 2 / m s. note: the values of dv/dt and k 0 provided below must not be exceeded in order to avoid damaging the capacitor. dv/dt and k 0 values lead spacing 10 mm 15 mm 22.5 mm 27.5 mm dv/dt in v/ m s 550 400 200 150 k 0 in v 2 / m s 429 000 312 000 156 000 117 000 impedance z versus frequency f (typical values) b81130 x2 / 275 vac not for new design 6
|
